iw62 TS Subwoofer
Product Description
Features
•
•
•
Unique application flexibility - easy configuration
possible for active, passive, mono or stereo modes
Designed to partner the Tannoy iw6 DS, iw6 TDC
and iw62 TDC full range in-wall loudspeaker products
The two 165mm (6.50”) bass drivers in the iw62 TS
deliver effective low frequency reinforcement from
29Hz - 110Hz in passive mode continuous power
handling 200W RMS
A high performance in wall subwoofer, the iw62 TS is designed to augment the low
frequency output of an in wall system installation. It uses the same construction and
mechanical installation method to ensure it is a perfect match, both acoustically and
visually, to the Tannoy full range in wall units.
The iw62 TS is unique in that it can operate in either passive or active mode, selectable by
a switch on the front baffle. In active mode an external controller can be used to manage
low frequency extension, the application of equalisation and allowing the crossover point to
be tailored to the rest of the system and room. Additionally the iw62 TS will operate in
stereo or mono mode; easily converted by means of link wires on the circuit board.
•
•
•
•
2nd order low pass crossover in passive mode -
determined by external controller in active mode
Simple and effective eight clamp mounting system -
self aligning for easy installation and removal
Four spring loaded gold terminals - cut links to drive in
stereo mode
Ideally suited to larger installations where higher
power premium performance in multi room distributed
audio and av systems, small venues, restaurants,
bars, business music systems and a vast array of
other public building installations.
Designed to partner the Tannoy iw6 DS, iw6 TDC and iw62 TDC full range in wall
loudspeaker products, the iw6s TS in wall subwoofer is equipped with two 165mm (6.50”)
long throw multi fibre, paper pulp bass drivers to deliver effective low frequency
reinforcement; rated from 29Hz - 110Hz in passive mode with a continuous power handling
of 200W RMS.
The driver and passive frequency dividing network are mounted in an injection moulded,
paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material.
The excellent structural integrity, when combined with the secure polycarbonate,
self-aligning eight clamp mounting system, ensures a performance enhancing rigid acoustic
coupling with the wall surface. This provides an immensely stable platform for the drivers to
deliver optimum performance. Robust, gold plated spring loaded terminals enable rapid
connection with optimum input signal integrity.
•
Grille and baffle can be painted to suit any décor
Applications
•
Foreground music & paging systems
Multi-room audio systems
Home theatre
Business music systems
Boardrooms and offices
Retail environments
Public address systems
Reception and waiting rooms
Airport, convention centres and hotels
•
•
•
•
•
•
•
•
Complementing any style of decor, the perforated metal grille and discreet moulded baffle
can be painted to blend seamlessly with any install environment. This in-wall subwoofer is
capable of delivering impressive results in large residential and commercial applications;
such as small entertainment venues, restaurants, bars, public buildings, board rooms, AV
installations and business music systems.
A steel back can is available as an optional accessory.
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
iW62TS Subwoofer data file issue:1.06 // 15.01.08
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iw62 TS Subwoofer
DIMENSIONAL SKETCHES
98.9mm
(3.89”)
5.0mm
(0.20”)
186.5mm
(7.34”)
186.5
[7.34"]
(16.73”)
425.0mm
473.5mm
(18.64”)
227.0mm
(8.94”)
TEMPLATE HOLE CUTOUT SIZE - 430mm x 193mm [16.93” x 7.60”]
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
iW62TS Subwoofer data file issue:1.06 // 15.01.08
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iw62 TS Subwoofer
IN WALL BACK CAN ACCESSORY
WALL COVERING MATERIAL
STUD
FITTED AFTER BACK CAN HAS
12.5 min
BEEN INSTALLED IN POSITION.
0.49” min
BEEN INSTALLED IN POSITION.
101.6 min
4.00” min
451.0mm
17.76”
89.1mm
199.0mm
3.51”
7.83”
TOP
45.00”
17.17”
0.
47.24”
436.0mm
1200.0mm
1143.0mm
96.7mm
310.0mm
3.81”
12.20”
Ordering Information
PART NUMBER
MODEL NAME
BAFFLE / GRILLE
COLOUR
PACKED
QUANTITY
PACKED
WEIGHT
8000 4220
8000 4240
8000 4260
iw62 TDC/TS Back Can
iw62 TDC/TS Transformer Back Can
Pre-install mounting ring for iw62 TDC/TS
Unpainted Steel
Unpainted Steel
-
1
1
-
9.50Kgs (20.90lbs)
10.50Kgs (23.1lbs)
-
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
iW62TS Subwoofer data file issue:1.06 // 15.01.08
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iw62 TS Subwoofer
Architectural specifications
The in wall subwoofer speaker shall consist of two 165mm (6.50") low frequency transducers.
Performance of the iw62 TS shall meet or exceed the following criteria: Frequency response measured at 1 metre on axis with a swept sine wave shall be
29Hz - 110Hz 6dB, sensitivity shall be at least 92dB or 2.83V @ 1 metre with minimal loss accounted for. Impedance of the drivers shall be 8 Ohms in
stereo mode and 4 Ohms in mono configuration. The average power handling shall be 200W.
Utilising an eight way clamping mechanism the baffle shall be constructed from moulded ABS and supplied with a perforated metal grille, both components
shall be paintable. The system shall not exceed the following dimensions: 474.50 x 227 x 108mm (18.63 x 8.93 x 4.25”) (H x W x D).
The mounting depth shall not exeed 99mm (3.90”).
The Tannoy in wall subwoofer system shall be... the iw62 TS.
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
iW62TS Subwoofer data file issue:1.06 // 15.01.08
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iw62 TS Subwoofer
NOTES
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
iW62TS Subwoofer data file issue:1.06 // 15.01.08
Tannoy adopts a policy of continuous improvement and product specification is subject to change
|